I get more and more into 3D-printing things for my sailboat. The next thing I made is a collar for the mast – it is almost waterproof now.

You can download the respective files for Autodesk Fusion 360 here.

The material I used is Filamentum ASA in Traffic White – it is UV-stable and quite nice to print – with the following parameters:

• Nozzle temperature: 250 °C
• Bed temperature: 105 °C
• Layer height: 0,19 mm
• Infill: 100%

The mast collar was printed on my Zortrax M200 3D printer.