I get more and more into 3D-printing things for my sailboat. The next thing I made is a collar for the mast – it is almost waterproof now.
You can download the respective files for Autodesk Fusion 360 here.
The material I used is Filamentum ASA in Traffic White – it is UV-stable and quite nice to print – with the following parameters:
- Nozzle temperature: 250 °C
- Bed temperature: 105 °C
- Layer height: 0,19 mm
- Infill: 100%
The mast collar was printed on my Zortrax M200 3D printer.